Customers compare RE44FR to these similar products
Products Featured in this Video
Michael: Hi there. I'm Michael with etrailer.com. Today we're going to be taking a quick look at the Reese weight distribution system. Now, if you're not familiar with what a weight distribution system does, it's going to help solve that problem that a lot of us have when we hook up our trailer to our tow vehicle and we're going down the road, our tow… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thank you for the information you provided, and I'll start by telling you that as a general rule it is a good idea to follow the recommendations of the vehicle manufacturer in regards to towing. Do you HAVE to use a weight distribution system if…
view full answer...E track like the part #E19148 (5 foot section) would work well for what you are looking to do. People use E track for car haulers all the time and it works well. We even have a wheel strap designed for E tracks, part #EM58523 which will work great.
view full answer...I recommend using the Fastway e2 Weight Distribution #FA92-00-0800 for your 7x14 Interstate Loadrunner tandem axle trailer. This hitch is rated for trailers up to 8,000lbs with a tongue weight between 400-800lbs. If your unloaded tongue weight is…
view full answer...The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…
view full answer...I recommend going with the 1,000lb SumoSprings Solo Custom Helper Springs #SS35GR for 4WD or #SS35GR for 2WD. These are going to give you all the support and control you need, without affecting your factory ride quality on daily driving. The 1.5K…
view full answer...The Reese Weight Distribution Systems like part #RE44FR will allow you to reverse without having to disengage the spring bars. That said, you need to make sure you are doing so at a relatively straight angle meaning you can't put the trailer at…
view full answer...You can certainly use a weight distribution system on your lifted truck. The key will be to find a weight distribution shank that offers you enough drop to be able to tow your trailer level. Weight distribution systems are available without a shank…
view full answer...If the center to center distance between adjacent tire mounting holes is 2-5/8 inches, you do indeed have a 5 on 4-1/2 inch bolt pattern. Going with two of the Kenda Karrier #AM32181 ST215/75-14 load range C radials which carry an 81mph M speed…
view full answer...The Reese Pro Round Bar Weight Distribution w Sway Control #RE44FR is rated for a tongue weight of 600-1,150lbs and a maximum trailer weight of 11,500lbs. With your trailer GVWR being 9465 and dry tongue weight of 650lbs you do meet all the…
view full answer...Between the 1,500 lb SumoSprings #SS95GR and 1,000 lb SumoSprings #SS35GR that fit your 2023 Nissan Titan, the best option is the latter, the 1k springs: - SumoSprings Solo Custom Helper Springs #SS35GR The 1,000 lb capacity is more than enough…
view full answer...When it comes to installing a weight distribution hitch on your 2022 Grey Wolf 18RR Trailer The Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 pounds GTW, 1,150 pounds TW #RE44FR is a good choice for you. Using this…
view full answer...The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…
view full answer...