Where Does Third Brake Light Camera Kit for 2022 Ford F-350 Get Power and Ground  

While we don't have an install manual link for the GCH third brake light camera kit part #3460005 I can help describe the install process. You'll unscrew and unplug your factory third brake light. Once removed, set your new custom bezel with…

If you have the factory auxiliary switch then just wire the Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision #3460001 to that. If you don't have the factory auxiliary switch then you will want to utilize that toggle…

If you're referring to using a rearview mirror that has a monitor inside of it then we have two options that will work if you already have a tailgate camera. The Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision…

The Custom Third Brake Light Camera System w/ Rear View Mirror - Night Vision - 4.3" Screen #3460005 uses a toggle switch to activate. You won't have it automatically pop up when you put your 2021 Ford F-450 Super Duty in reverse but you…

The best solution for a 3rd brake light camera on your 2022 F-250 is the Custom Third Brake Light Camera System w/ Rear View Mirror #3460005. At this time, there are no aftermarket cameras that can be integrated with your factory monitor. I recommend…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.