How Much Of The Fascia Needs To Be Cut When Installing Curt Front Hitch # 31374 On A 2018 Ram 1500  

There is some fascia trimming involved for both the 1-1/4" #C12169 and the 2" C13397 Curt trailer hitches that fit your 2019 Honda CR-V. I recommend going with the 2" receiver because it actually calls for less trimming…

The distance from the bottom of the sub frame, which is the same as the top of that bracket, to the bottom of the receiver on the #31374 is 6-7/8".

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an…

I checked the instruction guide for installation of the Curt Front Mount Trailer Hitch Receiver, part #31374, to your 2010 Dodge Ram 1500 4x4. The guide says that trimming the front fascia is optional but not necessary. The front fascia will flex…

In regards to the 1 Bike Add-On for Kuat Transfer V2 Bike Racks part #KU57FR, you don't have to remove and reinstall the wheel trays each time you want to use the add-on. The wheel trays will be installed onto the extension and then the extension…

If you have the Kuat Transfer V2 Bike Rack for 2 Bikes #KU84FR then the correct add-on to convert it to a 3-bike carrier is 1 Bike Add-On for Kuat Transfer Bike Racks #KU57FR.

I recommend going with the etrailer Trailer Hitch #e98848 for your 2022 Honda CR-V because it has a matte black finish that will do a great job at blending in with your fascia as well as hide any scratches that might happen from road debris hitting…

The Kuat Transfer #KU64FR and the RockyMounts MonoRail Solo part #RKY10007 are REALLY close in a lot of specs and are both really great bike racks with a very close price so it's a tough call to pick between the two. Both would also easy handle a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…