How to Determine Replacement Trailer Wheel Bearing Sizes
Question:
Are all trailer wheel bearings the same size? Like the one you sell, fits all
asked by: Dave B
Expert Reply:
Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer.
You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the spindle nut, remove the spindle nut, and then you will be able to remove the hub from your trailer.
Once the hub is removed you will be able to get the part numbers from the inner and outer bearings to determine the correct replacement parts for your spindles.
I have attached a photo of the parts showing where the part numbers are located and the areas that you will need to measure if your parts do not have part numbers etched on them.
Frys
7/7/2020
Need seals and I think there double seals on a loadrite boat trailer. L68149 UCF-6 inner bearing, L44649 outside bearing. Could not locate numbers on seals. Also need break shoes and hardware for loadrite trailer 10 inch brake drums. Can you advise on the correct parts? Thanks look forward to hearing from you.
Craig J.
5/19/2020
Hello I have a 91 yacht club boat trailer, it hauls a 17' searay fishing boat. I'm looking for bearings and seals for it, can u help me?
Johnny K.
4/26/2020
Have a trailer with inner bearing #68149 and outer bearing of #67048 probably old mobile home axles ,I bought some hubs from yall AKHD-655-6-K outer bearing was the same but inner bearing was way to large . Need to see if you have anything compatible so I can send hubs back for exchange
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Shop: Trailer Hitch
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: lippert axle bearings
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 5" Rim - 5 on 5 - Silver Powder Coat
- Search Results: 171255uc
- Q&A: Solution for Replacement Seal for 171255UC Oil Seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: pocket stake
- Search Results: trailer hub bearing
- Video: Review of Timken Trailer Bearings Races Seals Caps - Bearing And Race Kit - TMK52VR
- Search Results: lm67048
- Q&A: Availability of 6 Sets of 94 inch E-Track
- Search Results: gs~2250dl
- Search Results: gs 2250dl
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Identifying the Bearings and Seals on a Lippert Trailer Axle
- Q&A: Will Camco RhinoFLEX Sewer Hose Connect to Valterra Bayonet Fitting
- Q&A: Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- Video: Truryde Nylon Bushing Review
- Video: Command Electronics Trailer Lights - Clearance Lights - 328-003-17R Review
- Video: Optronics LED Mini Clearance or Side Marker Trailer Light Review
- Video: Optronics Mini LED Trailer Clearance and Side Marker Light Installation
- Video: Command LED Clearance or Side Marker Light with Reflex Reflector Installation 328-K-59LB
Cliff
3/15/2024
If I have the serial number for my trailer is there an easy way to look up this info without having to disassemble first?